In the service of the Automotive Industry

High quality products

Company

The firm of A.G. Porta was established in Turin in 1931 by Amedeo and Guglielmo Porta who were then employed as technicians at the Lancia Car Company.

Right from-the start, production was based on automatic lathes with special emphasis on the car industry.

The A.G. Porta firm was among the first to purchase multispindie lathes for machining customer parts, a policy they continued through gradually specializing in precision machining.

Our Products

Gearbox Bushings

Gearbox Bushings

Grind inside and outside

Injector Brackets

Injector Brackets

Cold forming (Patent n. TO2004A000465).

Alluminuim alloy extruded and machined (Patent n TO2005A000383).

Hot moulding and machined.

Produced by lost wax system and machined.

Injector Brackets

Cold forming (Patent n. TO2004A000465).

Alluminuim alloy extruded and machined (Patent n TO2005A000383).

Hot moulding and machined.

Produced by lost wax system and machined.

Transmission Gear Command Shaft

 

Transmission Gear Command Shaft

During the last years, in addition to the already well-established products, A.G. Porta SpA has started the production of new pre-assembled gearboxes groups within fully robotized.

Sensor Rings / Phonic Wheels

 

Sensor Rings / Phonic Wheels

Produced in two alternative versions:

a) Toothed by means of GROB system.

b) Pressed according to patent No. TO 92A000990.

Sensor Rings / Phonic Wheels

Produced in two alternative versions:

a) Toothed by means of GROB system.

b) Pressed according to patent No. TO 92A000990.

Investment Casting

 

“Chiavistello” gearbox actuator

Supplied to Magneti Marelli for Aston Martin and Audi.

“Shift Cylinder”

Supplied to Cirex for gearboxes SAAB.

“Shift Cylinder”

Supplied to Cirex for gearboxes SAAB.

Various Transmission Gearbox and Engine Components “FCA”

Produced in large runs from lost wax microcasts and machined at processing centres.

“Shift Cylinder”

Produced in large runs from lost wax microcasts and machined at processing centres.

“Shift Cylinder”

Produced in large runs from lost wax microcasts and machined at processing centres.

Piston Pins

 

Piston Pins

For years suppliers to FCA, for 100% of their production.

Since 2003, FCA POLSKA (100%).

Suppliers of planetary gear pins with mobyldenum to GENERAL MOTORS PWT. Germany plant.

Piston Pins

For years suppliers to FCA, for 100% of their production.

Since 2003, FCA POLSKA (100%).

Suppliers of planetary gear pins with mobyldenum to GENERAL MOTORS PWT. Germany plant.

Toothed Camshaft Pulleys

 

Toothed Camshaft Pulleys

Produced in sheet steel toothed by means of GROB swaging machine.

Our Major Clients

 

Where you can find us

Via Fernando Santi, 11, Moncalieri (TO)

Don't be shy.

Contact us and you will be recontacted as soon as possible.

#ContactUs